Amana ASD2628HES Refrigerator Manual

The Amana ASD2628HES is a side-by-side refrigerator featuring a spacious interior, advanced cooling technology, and energy-efficient performance. This model includes adjustable shelves, a water and ice dispenser, and various temperature controls to ensure optimal food preservation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Side-by-side design, water and ice dispenser, adjustable shelves, humidity-controlled crisper drawers.

Feature	Description
Water Dispenser	Provides chilled water on demand
Ice Maker	Automatic ice production for convenience
Adjustable Shelves	Customizable storage options for various items
Temperature Controls	Individual settings for refrigerator and freezer
LED Lighting	Bright and energy-efficient interior lighting

Installation

Unpack and inspect contents. Place on a level surface with adequate clearance.

Connect water supply: Ensure proper fittings are used.
Plug into AC power: Use a grounded outlet.
Adjust temperature settings: Set to recommended levels.

WARNING! Ensure refrigerator is stable to avoid tipping.

First-Time Setup

Power on the refrigerator; follow on-screen prompts if applicable.

Set refrigerator and freezer temperatures: Recommended settings are 37°F for the refrigerator and 0°F for the freezer.
Fill ice maker: Allow 24 hours for ice production to begin.
Check water supply: Ensure there are no leaks.

CAUTION! Ensure proper ventilation around the unit.

Specifications

Model: Amana ASD2628HES
Type: Side-by-side refrigerator
Dimensions: 69.5" H x 35.5" W x 33" D
Capacity: 26 cu. ft.
Energy Star Rated: Yes
Cooling System: Frost-free
Power Supply: 115V, 60Hz

Controls and Settings

Access temperature controls via the digital display on the front panel. Adjust settings for both refrigerator and freezer compartments as needed.

Connecting Water Supply

Ensure a proper connection to the water supply for the ice maker and water dispenser.

Turn off the water supply before connecting.
Use a 1/4" water line and appropriate fittings.
Check for leaks after connection.

Tip: Use a water filter for better tasting water.

Using the Ice Maker

Follow these steps to use the ice maker effectively.

Ensure the ice maker is turned on.
Allow 24 hours for ice production to begin.
Check the ice bin regularly and empty as needed.

WARNING! Do not overload the ice bin.

Maintenance and Care

Regularly clean the interior and exterior surfaces. Replace water filters as recommended.

CAUTION! Unplug before performing any maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check outlet and power cord.
Ice maker not producing ice	Water supply issue	Ensure water line is connected and turned on.
Noise from refrigerator	Compressor operation	This is normal; check for loose items.
Doors not sealing properly	Dirty door seals	Clean seals and check for damage.

Reset: Unplug for 5 minutes to reset the system if needed.